Pompa Marcaj Rutier CMC AR60

Pompa Marcaj Rutier CMC AR60 Airless Pompa cu piston

Mashina-za-patna-markirovka-CMC-AR-60.jpg
Mashina-za-patna-markirovka-CMC-AR-60.jpg

Pompa Marcaj Rutier CMC AR60 Airless Pompa cu piston

SPRAYABLE PAINTS: monocomponent not refractive paints (=without premixed glass beads) solvent based or waterborne paints, paints with specific formulation for airless machines with 70-75 KU viscosity at 20⁰C. Solvent based or waterborne epoxy paints. Polyurethane paints 
RECOMMENDED FOR: road marking jobs. For all jobs requiring high performances and easy handling, even on roads with high slopes. With the suitable accessories, ideal for striping 2 lines with drop-on glass beads simultaneously.

Gasoline engine:
-power 16 HP
-electric starting
Hydraulic drive with:
- 2 motors directly coupled on front wheels
- hydraulic negative brakes
-control for forward, reverse and neutral gear
-VARIABLE-FLOW PUMP: guarantees more safety for operator
and better performance. Allows to overcome steep slopes
Swivel rear wheel. It can be locked or unlocked during the
work by 2 pneumatic controls on dashboard
Holder for paint bucket
Airless hydraulic piston pump:
-max. vol. flow 6,17 l/min
Piston pulsation dampener
Compressor:
-flow air rate 394 l/min
Automatic paint gun mounted on fixed L support (with
adjustable height). Standard nozzle for 10-20 cm line. (Line
width can be ranged from 10 cm to 30 cm by changing nozzle
and adjusting gun height. Fixed support can be replaced with
pneumatic support. Look at optional)
High-pressure paint filter
MAX. LINE WIDTH: 90 cm
 
OPTIONAL EQUIPMENT:
- Light, for night works
- Turning light, for a better visibility of operator on the street
- Electronic spacing device C8000:
 8 programs storable
 control: upto 3 guns with only one program
 alarm when speed is outside the range of minimum/maximum speed set
 data recorded for each gun: total solid line metres
 total data recorded for machine: total driven Km

- Electronic controller and spacing device C9000:
 10 programs storable
 control: upto 3 guns with 3 different programs simultensously; glass bead delay for each gun; up to 2 airless pumps
with possibility to compare pressures and ratio (e.g. ratio 50:50 or 98:2)
 display of effective applied thickness (avergae every 250 m), with alarm when the speed of application is not
compatible with thickness set
 alarm setting for: delta pressure between 2 pumps, zero pressure, pump not working
 data recorded for each gun: applied thickness in micron; total working hours; total driven metres; total solid line
metres; total empty space metres; total sprayed paint
 data recorded for each pump: total number of pump cycles
 total data recorded for machine: total working hours, total driven metres; total driven Km; total sprayed paint; total
hours and pump cycles
 daily report, downloadable with USB stick. Storable capacity 7 days. Thickness applied each minute (with date and time)
- Trailer with standing driver (SUGGESTED OPTIONAL)
- Trailer with driver seat
- Second automatic paint gun with independent control, to stripe 50 cm or 2 lines at the same time (for example continuous
line + skip line)
- Third automatic paint gun to stripe 90 cm
- Pneumatic support for paint gun (one disc), to keep automatic gun always at the same distance from ground, ensuring
constant width of the line (SUGGESTED OPTIONAL)
- Manual paint gun-short with 10 m hose, for stenciling (SUGGESTED OPTIONAL)
- Manual paint gun -long (with extension 45 cm) with 10 m hose, for stenciling without bending and standing farther from paint
spray
- Pressurized glass bead system (SUGGESTED OPTIONAL) consisting of:
 glass bead tank. Available: - pressurized tank capacity 15,5 l
- pressurized conic tank capacity 20 l
- pressurized tank capacity 26 l
 automatic glass bead gun with adjustable diffuser
 closing delay regulator for bead gun
- Second automatic glass bead gun with independent delay regulator.
- Third automatic glass bead gun.
- Manual glass bead gun with air hose and bead hose, for bead application on stenciling.
We suggest to complete the machine equipment with:
- nozzle for line width 30 cm

 

- nozzle for surfaces, advised for stenciling (crosswalk, symbols, legends, stops, …).

Dimensions: 185x75x h160 cm;

 

Weight: 540 Kg

Write a review:

* Your rating:
...

User comments: