Masini Marcaj Rutier CMC 250 C-ST 2 componente Plastic la rece
APPLICATIONS: 2-component cold plastic; automatic mixing of 2 components in the shoe
RECOMMENDED FOR: high thickness flat line, agglomerate line, profile line, only ribs. For jobs involving a big capacity of plastic tank, the precision and the stability of a compact 4 wheel sit-on machine
Diesel engine:
-power 34 HP
-liquid cooling
Lights and turning light
Warning board for operating vehicles with arrow for left/right
car overtaking and 2 flashing
Hydraulic drive with:
-2 motors directly coupled on rear wheels
-hydraulic negative brakes
-control for forward, reverse and neutral gear with engagement
of negative brakes
-variable-flow pump
Steering on front wheels
Steering diameter 7,35 m
Seat with adjustable position (left/right; forward/back)
Sunshade roof
Pressurized tank for cold plastic:
-capacity 250 l
-made of stainless steel
-with hydraulic stirrer
Gravity tank for powder catalyst: capacity 22 l. With
electric dosing device, electronically adjustable
Pressurized glass bead tank, capacity 100 l. With
regulator of pressure and moisture separator
Compressor:
-flow air rate 827 l/min
Shoe for flat line and profile line or shoe for
agglomerate line, with adjustable opening for regulation
of material to apply. Type and width of shoe to be
chosen (look at optional)
Automatic glass bead gun, with air of distribution.
Diffuser with adjustable slope and adjustable opening
angles. Closing delay regulator for bead gun
MAX. LINE WIDTH: 30 cm
Dimensions: 345x110x h without warning board 210 cm;
Weight: 1300 Kg
Kit for agglomerate line consisting of:
-roller with replaceable teeth
-roller holder with hydraulic motor
-2 priority valves that makes roller and mixer speed
independent from number of engine revolutions
Electronic spacing device C8000 + program for profile
line :
- 8 programs storable
- control: upto 3 guns with only one program
- alarm when speed is outside the range of
minimum/maximum speed set
- data recorded for each gun: total solid line metres
- total data recorded for machine: total driven Km;
-profile program: sets the length of each bar and the
distance between 2 bars
OPERATION OF MACHINE:
2 components (the catalyst and the plastic) are automatically mixed in the shoe.
Depending on type of shoe used is possible to mark: high thickness flat line, agglomerate line, profile line, only ribs.
Glass beads are dropped on and distributed with supplementary air. Bead delay regulator allows to apply beads up to the end of
the line, accurately matching the paint end
OPTIONAL EQUIPMENT:
- Trailer for cones with seat for operator
- Kit for 30 cm line, composed by second mixer and longer roller
Shoes for agglomerate line are available in following widths:
- shoe for agglomerate line width 10 cm
- shoe for agglomerate line width 12 cm
- shoe for agglomerate line width 15 cm
- shoe for agglomerate line width 20 cm
- shoe for agglomerate line width 25 cm
- shoe for agglomerate line width 30 cm.
Shoes for flat line/profile line are available in following widths:
- shoe for flat line and profile line width 10 cm
- shoe for flat line and profile line width 12 cm
- shoe for flat line and profile line width 15 cm
- shoe for flat line and profile line width 20 cm
- shoe for flat line and profile line width 25 cm
- shoe for flat line and profile line width 30 cm.
Български
English
Русский
Ελληνικά
Italiano
Deutsch
Write a review: