Road marking machines Airspray L40-PRO
Airspray push machine or with Hydraulic Motorized Chariot
SPRAYABLE PAINTS: refractive paints (=with premixed glass beads), not refractive paints, special paints with high content antiskid.
RECOMMENDED FOR: small road marking jobs, parking lots, sports fields, cycle lanes. Jobs involving frequent color changes.
The photo doesn’t show a standard machine.
Pressurized paint tank:
-capacity 40 l
-with manual stirrer and cover totally
removable for easier and quicker cleaning
Solvent tank for flushing of gun and paint hose
Compressor:
-flow air rate 394 l/min
Automatic paint gun with line limiter (shroud),
mounted on fixed support with gun height
adjustable. (Fixed support can be replaced with
pneumatic support or with marking discs. Look
at optional). Standard nozzle for 10-20 cm line
MAX. LINE WIDTH: 30 cm
(achievable only with proper optional
equipment)
Gasoline engine:
-power 6 HP
-self-winding pull start
Hand push. (It's possible to equip the line striper with HMC, the hydraulic
motorized chariot. Look at optional)
Swivel front wheel. It can be locked or unlocked during the work by a
lever on handlebars
OPTIONAL EQUIPMENT:
- HMC Hydraulic Motorized Chariot: transforms the push machine in a
machine with drive. Useful to increase productivity, to finish works quicker
and easier, with less fatigue. Indispensable to mark on slopes. With seat.
(Look at TDS of HMC motorized chariot)
- Pneumatic support for paint gun (one disc), to keep automatic gun always
at the same distance from ground, ensuring constant width of the line
- Marking discs, to get a perfect definition of line edges. Useful particularly for concrete surfaces. Available in following widths:
- marking discs for 10-20 cm line (SUGGESTED OPTIONAL)
- marking discs for 10-30 cm line
- Manual paint gun-short with 5 m air hose and 5 m paint hose, for stenciling (SUGGESTED OPTIONAL)
- Manual paint gun - long (with extension 40 cm) with 5 m air hose and 5 m paint hose, for stenciling without bending and
standing farther from paint spray
- Pressurized glass bead system consisting of:
pressurized glass bead tank capacity 15,5 l
automatic glass bead gun with adjustable diffuser
closing delay regulator for bead gun
- Manual glass bead gun with air hose and bead hose, for bead application on stenciling.
Attention: it can be used only if striper is equipped with optional pressurized Glass bead system
- Supplementary pressurized tank for paint. Available capacities: - pressurized paint tank capacity 15,5 l
- pressurized paint tank capacity 26 l.
Български
Русский
Român
Ελληνικά
Italiano
Deutsch
Write a review: