CMC AR30PRO-P-2C Airless Road Marking Machine
SPRAYABLE PAINTS: monocomponent not refractive paints (=without premixed glass beads) solvent based or waterborne paints, paints with specific formulation for airless machines with 70-75 KU viscosity at 20?C. Solvent based or waterborne epoxy paints. Polyurethane paints
SUITABLE FOR: indoor markings, on concrete surfaces, for jobs requiring extreme handling in small spaces. For small road marking jobs, parking lots, sports fields, cycle lanes. For using 2 colours at the same time. With the suitable accessories for 2 component cold sprayable plastics, 1:1 ratio, external mixing spray-in-spray
TECHNICAL DATA:
Holder for 2 paint buckets (max diam. 32 cm)
2 airless hydraulic piston pumps:
-max. delivery 2 x 6,17 l/min
-with 2 valves for independent regulation of 2 pumps
2 removable paint guns can be used as manual gun (for stenciling) or as automatic gun controlled by lever (for line). Standard nozzle for 10-20 cm line (Line width can be ranged from 5 cm to 30 cm by changing nozzle and adjusting gun height. Striper can be also equipped for Cold Spray Plastic, 1:1, external mixing. Look at optional)
Gun support with wheel: to follow the road
2 paint hoses of 15 m
2 high-pressure paint filters
MAX. LINE WIDTH: 50 cm
(achievable using the 2 guns with a single colour)
Gasoline engine:
-power 9 HP
-self-winding pull start
Hand push (It's possible to equip the line striper with HMC, the hydraulic motorized chariot. Look at optional)
Parking brake on rear wheel
Swivel front wheel, to stripe very sharp curves. It can be locked or unlocked during the work by a lever on handlebars. Steering hardness is adjustable by proper regulator
Telescopic pointer for easily following pre-marking or precisely matching existing line
Machine is equipped with all safety devices according to EU requirements.
Machine conforms to:
EU Directive 2006/42/EC on Machinery
OPERATION OF MACHINE
Striper is equipped with 2 independent paint circuits and 2 guns, in order to apply 2 colours at the same time (or a single colour striping 50 cm line).
With proper equipment (look at optional), striper can also apply 2 component Cold Spray Plastic (mixing ratio 1:1, external mixing). External mixing, known as “spray in spray”, is a simple method, fast and easy to use: thanks to double head gun specifically designed for, the 2 components meet after they have been sprayed.
Cold spray plastic (CSP) is a 2 component product based on reactive methacrylic resins (MMA) solvent free, well known for its high resistance to wear. The use of CSP 1:1 requires the manual pre-mixing of one of the components (A or B, depends on manufacturer) with a third component, the catalyst.
OPTIONAL EQUIPMENT:
- Hydraulic motorized chariot: transforms the push machine in a machine with drive. Useful to increase productivity, to finish works quicker and easier, with less fatigue. Indispensable to mark on slopes. With seat. (Look at TDS of HMC motorized chariot)
- Kit for 1:1 external mixing consisting of:
. 2 component CSP manual gun, 1:1 ratio, external mixing: for stenciling with cold spray plastic
. support and lever control: allow to use 2 component manual gun as automatic gun for marking lines with cold spray plastic
- Gravity glass bead dispenser (SUGGESTED OPTIONAL) consisting of:
. gravity glass bead tank, capacity 24 l
. bead dispenser, with adjustable width. Available in following widths: - 1 dispenser for line width 15 cm
- 2 dispensers for 2 lines width 15 cm
- 1 dispenser for line width 30 cm
- 2 piston pulsation dampeners,to reduce the lenght of paint hose
We suggest to complete the machine equipment with:
- nozzle for line width 5 cm
- nozzle for line width 30 cm
- nozzle for surfaces, advised for stenciling (crosswalk, symbols, legends, stops, …).
Български
Русский
Român
Ελληνικά
Italiano
Deutsch
Write a review: