AIRLESS ROAD MARKING MACHINE CMC AR30PRO-2C Cold Spray Plastic 1:1. WITH DOUBLE DIAPHRAGM PUMP
SPRAYABLE PAINTS: monocomponent not refractive paints (=without premixed glass beads) solvent based or waterborne paints, paints with specific formulation for airless machines with 70-75 KU viscosity at 20⁰C. Solvent based or waterborne epoxy paints. Polyurethane paints
SUITABLE FOR: indoor markings, on concrete surfaces, for jobs requiring extreme handling in small spaces. For small road marking jobs, parking lots, sports fields, cycle lanes. For using 2 colours at the same time. With the suitable accessories for 2 component cold sprayable plastics, 1:1 ratio, external mixing spray-in-spray
Holder for 2 paint buckets (max. diam. 32 cm)
Airless double diaphragm pump:
-max. working pressure 210 bar
-max. delivery 2 x 5,9 l/min
-with 2 valves for independent regulation of 2
heads
2 removable paint guns: can be used as manual
guns (for stenciling) or as automatic guns controlled
by lever (for line). Standard nozzles for 10-20 cm
line. (Line width can be ranged from 5 cm to 30 cm
by changing nozzle and adjusting gun height. Striper
can be also equipped for Cold Spray Plastic, 1:1,
external mixing. Look at optional)
Gun support with wheel: to follow the road
2 paint hoses of 7 m
MAX. LINE WIDTH: 50 cm
(achievable using the 2 guns with a single colour)
Gasoline engine:
-power 6 HP
-self-winding pull start
Hand push
Parking brake on front wheel
Steering rear wheels to stripe curves easily. With stabilizer springs
that facilitate wheel realignment. Wheels also can be locked for
straight lines
Telescopic pointer for easily following pre-marking or precisely
matching existing line
Handlebars with adjustable height
Machine is equipped with all safety devices according to EU requirements.
Machine conforms to:
EU Directive 2006/42/EC on Machinery
OPERATION OF MACHINE:
Striper is equipped with 2 independent paint circuits and 2 guns, in order to apply 2 colours at the same time (or a single colour
striping 50 cm line).
With proper equipment (look at optional), striper can also apply 2 component Cold Spray Plastic (mixing ratio 1:1,
external mixing). External mixing, known as “spray in spray”, is a simple method, fast and easy to use: thanks to double head
gun specifically designed for, the 2 components meet after they have been sprayed.
Cold spray plastic (CSP) is a 2 component product based on reactive methacrylic resins (MMA) solvent free, well known for its
high resistance to wear. The use of CSP 1:1 requires the manual pre-mixing of one of the components (A or B, depends on
manufacturer) with a third component, the catalyst
OPTIONAL EQUIPMENT:
- Kit for 1:1 external mixing consisting of:
* 2 component CSP manual gun, 1:1 ratio, external mixing: for stenciling with cold spray plastic
* support and lever control: allow to use 2 component manual gun as automatic gun for marking lines with cold
spray plastic
- Gravity glass bead dispenser (SUGGESTED OPTIONAL) consisting of:
* gravity glass bead tank, capacity 24 l
* bead dispenser, with adjustable width. Available in following widths: - dispenser for line width 15 cm
- dispenser for line width 30 cm
We suggest to complete the machine equipment with:
- nozzle for line width 5 cm
- nozzle for line width 30 cm
- nozzle for surfaces, advised for stenciling (crosswalk, symbols, legends, stops, …)
Български
Русский
Român
Ελληνικά
Italiano
Deutsch
Write a review: