CMC AR30-PRO AIRLESS ROAD MARKING MACHINE WITH DIAPHRAGM PUMP
SPRAYABLE PAINTS:
Monocomponent not refractive paints (=without premixed glass beads) solvent based or waterborne paints, paints with specific formulation for airless machines with 70-75 KU viscosity at 20⁰C. Solvent based or waterborne epoxy paints. Polyurethane paints
SUITABLE FOR:
Indoor markings, on concrete surfaces, for jobs requiring extreme handling in small spaces. For small road marking jobs, parking lots, sports fields, cycle lanes. Jobs involving frequent colour changes. With the suitable accessories, ideal for working where is forbidden using combustion engine (as in buildings for food production and storage): in a few minutes it is possible a quick replacement of gasoline engine with electric motor (and vice versa)
Holder for paint bucket (max diam. 32 cm)
Airless diaphragm pump:
-max. working pressure 210 bar
-max. delivery 5,9 l/min
Removable paint gun: can be used as manual
gun (for stenciling) or as automatic gun
controlled by lever (for line). Standard nozzle
for 10-20 cm line. (Line width can be ranged
from 5 cm to 30 cm by changing nozzle and
adjusting gun height)
Gun support with wheel: to follow the road
10 m paint hose
MAX. LINE WIDTH: 50 cm
(achievable only with proper optional
equipment)
Gasoline engine:
-power 6 HP
-self-winding pull start
(In a few minutes you can quickly replace gasoline engine with electric
motor. Look at optional)
Hand push
Parking brake on rear wheel
Swivel front wheel, to stripe very sharp curves. It can be locked or
unlocked during the work by a lever on handlebars. Steering hardness is
adjustable by proper regulator
Telescopic pointer for easily following pre-marking or precisely matching
existing line
Handlebars with adjustable height
OPTIONAL EQUIPMENT:
- Kit electric motor 3HP, one-phase, with support, indispensable for working where is forbidden using combustion engine (as in
buildings for food production and storage). Striper is designed for a simple and quick replacement of gasoline engine (standard)
with electric motor (optional): in a few minutes, directly on the site, you can turn gasoline striper into electric striper (and vice
versa)
- High-pressure paint filter, with discharge cock
- Second manual paint gun with kit of cocks, 10 m hose, support and lever control.
It’s needful for striping 50 cm line
- Gravity glass bead dispenser consisting of:
* gravity glass bead tank, capacity 24 l
* bead dispenser, with adjustable width. Available in following widths: - dispenser for line width 15 cm
- dispenser for line width 30 cm
We suggest to complete the machine equipment with:
- nozzle for line width 5 cm
- nozzle for line width 30 cm
- nozzle for surfaces, advised for stenciling (crosswalk, symbols, legends, stops, …).
Machine is equipped with all safety devices according to EU requirements.
Machine conforms to:
EU Directive 2006/42/EC on Machinery
Български
Русский
Român
Ελληνικά
Italiano
Deutsch
Write a review: