Electrical pump for conveying and spraying liquid and pasty, mineral-, water-, or bitumen based materials
Features
The UNIVERSAL S8 Peristaltic Pump transports the material in a manner
in which the mechanical moving parts do not come into contact with
the material.
Due to the low pressures created in the pump and hoses the wear
to the pump is minimized.
Technical data
Drive system direct drive
Motor alternating current motor
Iso class 230 V / 2.25 A / 50 Hz or
110 V / 2.25 A / 60 Hz
Power requirement 550 W
rpm 1400
Efficiency Cos = 0.98
Operating data
Motor rpm 220
Working temperature approx. + 20° C
Gearing 1 : 6.3
Torque 15.5 Nm
Pump capacity approx. 8,5 l / m
Working pressure 0 to 15 bar
Weight (with carriage) approx. 35 kg
Hose length Max. 40 m with 3 x 2.5 mm?
Use only with a 30 mA ground fault current protection switch or with
a Portable Residual Current Device, (PRCD).
When using this pump for spraying we suggest a compressor with
at least a 300 l / min. air capacity.
Field of application
For spraying liquid and pasty, mineral-, water-, or bitumen based
materials such as 1 and 2 component polymer modified bitumen
thick film sealants, elastic and rigid waterproofing slurries, liquid
membranes, and mortars.
Equipment components
The basic equipment delivered with the UNIVERSAL S8 Peristaltic pump
includes:
* 30 l material hopper
* Pump hose (nominal diameter 25 mm x 10 m with Geka
coupling connection)
* Spray head with three different nozzle sizes
* Cable remote On / Off switch
Български
Русский
Român
Ελληνικά
Italiano
Deutsch
Write a review: