Grundfos UPA 15 90

Grundfos UPA 15-90

GRUNDFOS-UPA-15-90-Tsirkulatsionni-pompi.jpg
GRUNDFOS-UPA-15-90-Tsirkulatsionni-pompi.jpg

Grundfos UPA 15-90 Circulating water pump


Applications:
UPA 15-90 is a home booster pump designed to increase the pressure in domestic plumbing.
The pump provides additional pressure to showers, taps and other consumers. Used in open piping systems.
It is recommended to perform the installation on the water supply after the water meter. In case of insufficient pressure from the central water supply (for example 1.5 bar) we can install UPA 15-90 after the water meter and at project consumption of 1 m³ / h we will increase the pressure of the outgoing consumer by 0.5 bar, the resulting pressure will be 2 bar.
 
 
Possible operating modes: MANUAL, AUTOMATIC, OFF
Manual (the pump runs continuously, even with the taps closed. For this reason, at least one open tap is recommended in this mode to avoid overheating the water)
Off
Set with 1.5 m cable
Single-phase power supply: 1 x 220-240 V, 50 Hz
 

Technical data and characteristics:

Pump unit for increasing the pressure by 0.5-0.7 bar for low water consumption - up to 1 m³ / h
Flow rate - up to 1.7 m³ / h
Head - up to 9 m (0.9 bar)
Housing material: cast iron.
Temperature range: 2 ÷ 70 ° C
Power: 40 ÷ 118 W
Set with hollanders 1/2 "ending with external threads
Mounting length: 160 mm
Manufacturer: Grundfos

Write a review:

* Your rating:
...

User comments: