Cyclone Dust Collector SN50
FeaturesCyclone Powder Dust Collector :
Static electricity is generated during operation. To prevent static electricity, use a three-core power cord with a grounding. Also, use it in an environment below 80C.
In order to ensure the normal use of the wind dust collector, the intake air volume of the suction port should be greater than the dust input amount, otherwise, the phenomenon of “ashing” will occur.
It is not allowed to bury the suction port in the ash. If it is done, the dust collector circuit can only discharge dust from the fan because there is no air or the air content is too small.
The diameter of the matching straight pipe is larger than the inner diameter of the dust collector. When assembling, firstly heat the dust collector gas pipe, then insert the straight pipe, and fix it after cooling.
Description :
Made of high-quality materials for long life - Filter Dust Collector
Specifications:
Supporting power: ≥750w
Supporting air volume: 80-180m3/h
Supporting wind pressure: 1.8-38kPa
Color: white
Material: HDPE
Package Included:
1*Industrial dust collector
Notes:
1. Since the size above is measured by hand, the size of the actual item could be slightly different from the size above.
2. Due to the lighting effects, monitor settings, etc. There could be some slight differences in the color tone of the pictures and the actual item.
Български
Русский
Român
Ελληνικά
Italiano
Deutsch
Write a review: