Serafimov Systems SUPER VII Professional Airless Paint Sprayer with LOW POSITION SUCTION VALVE
is equipped with 2500W powerful brushless motor and LONG piston rod,
similar to Mark VII & Mark X. Designed for everyday use on all residential, industrial and commercial applications spraying with one, two or three guns. Suitable for professionals spraying all kinds of materials, such as Lacquer, Latex, Sealer, Varnish, Water-Based Paints, Oil-Base Paints, Exterior Stain, Multi-Color, Block Filler, Elastomerics, Epoxy, Dry Fall / Fog, Mastic, Spackling, Putty, Dry Wall Mud, Putty Plaster, Roof Coatings, etc.
TECHNICAL DATA:
Model Number: Serafimov Systems SUPER VII
Suction Valve: Low Position
Pressure Controlling: Digital + Electronical Pressure
Motor Power: 2500W (Brushless Motor)
Voltage: 200-240V/50&60HZ
Motor type: Brushless Motor
Flow Rate: 7.0L/min
Max. Tip Size: 0.043″
Max. Tip Size 2 guns: 0.023″
Max. Tip Size 3 guns: 0.015″
Max. Pressure: 210bar
Max. Spraying Pressure: 210bar-0.035″ , 110bar-0.043″
Max. Hose Length: 90 meters/300ft
Wooden Case Size: 70*52*87cm
N.W/G.W.: 45/55kgs
With spray gun(1pc tip guard + 2pcs tip #531/#541), 3/8”NPSM*15m hose, 1/4”NPSM*1m whip hose.
ADVANTAGES:
1. Low Positon Suction Valve, Long Piston Rod.
The LONG PISTON and low position of the inlet valve of the SUPER VII
generates the higher suction power for high viscosity materials,
such as putty / drywall mud / gypsum / white cement / lime based / floor epoxy /
fireproofing / anti-corrosive paint / emulsions and fillings etc.
2.The microprocessor pressure control.
The microprocessor control system will ensure the consistent fan and constant spraying pressure with low pulse and tight pressure deadband (5%). Just set your desired pressure easily, and the microprocessor will generate the fast response when spraying.
3.TEFC/Brushless Motor.
The brushless motor is more powerful, durable and reliable, no carbon brush and
no spark during the spraying, the oil paint or the flammable paint will be no problems.
4.Semi-automatic Oiler.
You only need to press the Oiling button every day before spraying, the machine will be self-
lubricated and it will absolutely prolong the sprayer’s lifetime and
with less parts replacing/repairing.
5.Faster Cleaning.
Adjust the pressure knob to cleaning position, The turbo pulse clean by fast flush, totally clean your machine quickly and efficiently.
6.Automatic Speed Adjustment
When the paint finished in the tank, the microprocessor will reduce the speed of the motor, for reducing the wear of the piston rod&V-packing.
7.Digital Display
Digital display for pressure which is easy for reading during the painting job.
8.THREE Guns available.
2 or 3 guns are available at the same time for higher efficiency.
Български
Русский
Român
Ελληνικά
Italiano
Deutsch
Write a review: