Maschinen Strassenmarkierungen CMC AR180 Airless Kolbenpumpen
SPRAYABLE PAINTS: monocomponent not refractive paints (=without premixed glass beads) solvent based or waterborne paints, paints with specific formulation for airless machines with 70-75 KU viscosity at 20⁰C
RECOMMENDED FOR: jobs involving a big capacity of paint, high performances, the precision and the stability of a compact 4 wheel sit-on machine. With the suitable accessories, ideal for striping 2 lines with drop-on glass beads simultaneously and for striping 90 cm in only one pass
Gasoline engine:
-power 27 HP
Lights and turning light
Hydraulic drive with:
- 2 motors directly coupled on rear wheels
-control for forward, reverse and neutral gear
-variable-flow pump
Hydraulic oil cooler
Steering on front wheels
Steering diameter 6,7 m
Seat with adjustable position (left/right; forward/back)
Sunshade roof
Paint tank:
-capacity 180 l
-made of stainless steel
-with manual stirrer
Solvent tank for flushing of gun and paint hose
Pressurized glass bead tank, capacity 35 l. With
regulator of pressure and moisture separator
Airless hydraulic piston pump:
-max. vol. flow 8,9 l/min
Compressor:
-flow air rate 515 l/min
Automatic paint gun mounted on fixed L support (with
adjustable height). Standard nozzle for 10-20 cm line.
High-pressure paint filter
Automatic glass bead gun. Diffuser with adjustable
slope and adjustable opening angles. Closing delay
regulator for bead gun
MAX. LINE WIDTH: 90 cm
Dimensions 220x90x h without sunshade roof 185 cm;
Weight: 825 Kg
Electronic spacing device C8000:
- 8 programs storable
- control: upto 3 guns with only one program
- alarm when speed is outside the range of
minimum/maximum speed set
- data recorded for each gun: total solid line metres
- total data recorded for machine: total driven Km
OPTIONAL EQUIPMENT:
- Electronic controller and spacing device C9000:
10 programs storable
control: upto 3 guns with 3 different programs simultensously; glass bead delay for each gun; up to 2 airless pumps
with possibility to compare pressures and ratio (e.g. ratio 50:50 or 98:2)
display of effective applied thickness (avergae every 250 m), with alarm when the speed of application is not
compatible with thickness set
alarm setting for: delta pressure between 2 pumps, zero pressure, pump not working
data recorded for each gun: applied thickness in micron; total working hours; total driven metres; total solid line
metres; total empty space metres; total sprayed paint
data recorded for each pump: total number of pump cycles
total data recorded for machine: total working hours, total driven metres; total driven Km; total sprayed paint; total
hours and pump cycles
daily report, downloadable with USB stick. Storable capacity 7 days. Thickness applied each minute (with date and time)
- Trailer for cones with seat for operator (SUGGESTED OPTIONAL)
- Second automatic paint gun with independent control to stripe 50 cm or 2 lines at the same time (for example continuous line
+ skip line (SUGGESTED OPTIONAL)
- Third automatic paint gun to stripe 90 cm
- Pneumatic support for paint gun (one disc), to keep automatic gun always at the same distance from ground, ensuring
constant width of the line. (SUGGESTED OPTIONAL)
- Manual paint gun-short with 10 m hose, for stenciling
- Manual paint gun -long (with extension 45 cm) with 10 m hose, for stenciling without bending and standing farther from paint
spray
- Supplementary 35 l pressurized tank for glass beads
- Second automatic glass bead gun with independent delay regulator (SUGGESTED OPTIONAL)
- Third automatic glass bead gun
- Manual glass bead gun with air hose and bead hose, for bead application on stenciling
- 26 l pressurized tank and side extension bracket for pre-marking
We suggest to complete the machine equipment with:
- nozzle for line width 30 cm
- nozzle for surfaces, advised for stenciling (crosswalk, symbols, legends, stops, …).
Български
English
Русский
Român
Ελληνικά
Italiano
Write a review: